Nederlands (Nederland)ACT 2-Port USB-C®/HDMI 4K@60Hz KVM switch
Item No.AC7922
4K@60Hz | cables included | metal housing |100W USB-C® PD Pass-through | locked power connection | mounting brackets
- 2-Port 4K@60Hz USB Type-C® and HDMI KVM Switch: control two computers with a single monitor, USB keyboard and mouse
- Supports a resolution up to 3840x2160 (4K) @60Hz, 2K@144Hz, USB Type-C® DisplayPort Alternate Mode 1.4, HDMI 2.0 and HDCP 2.3 compliant
- 4 USB-A ports 5Gbps for peripheral sharing; 3.5mm audio out port
- 100W Power Delivery pass-through port for connecting the laptop’s USB-C charger and powering the connected USB-C laptop
- Control the KVM switch with the front panel select button, IR remote control, keyboard hotkeys, mouse or RS-232 commands
- Supplied with an HDMI cable, USB cables, remote control, RS-232 connector and mounting brackets
- EDID emulator per input port provides correct information to the connected PCs
- Power supply included (12V / 1A / 12W); secure locked power connection
- Automatic input switching
The AC7922 2-port USB-C/HDMI KVM switch controls two computers while using a single monitor, single USB keyboard and mouse. The HDMI output supports a monitor with a resolution up to 4K@60Hz. The AC7922 lets you switch between computers using the buttons on the switch itself, the IR remote control, keyboard hotkeys, a mouse, or RS-232 commands. The AC7922 has a solid metal housing and comes with all needed cabling.
Control two devices with a single HDMI monitor, keyboard and mouse
Simplify your workspace by connecting one computer to the AC7922 via HDMI and the other computer/laptop via USB-C. Connect a single HDMI monitor and a keyboard and mouse set to the switch and control both host devices with minimal setup.
Supports up to 4K@60Hz
The AC7922 USB-C/HDMI KVM switch supports 4K@60Hz, 4:4:4 12-bit, HDMI 2.0 and is HDCP 2.3 compliant. The EDID emulator in the KVM switch provides the correct display information from the monitor to the connected device.
Easy switching between computers
Switching between two connected computers is easy with the dedicated button on the AC7922 KVM switch. Prefer to use IR control, a mouse, keyboard shortcuts or RS-232 commands? This is also supported.
100W Power Delivery pass-through
Connect a separate USB-C charger to the charging port of the KVM switch. The connected device receives power via the connected USB-C connection cable.
Automatic input switching
Have two computers connected to the KVM and only one is active? The AC7922 will automatically detect the active device.
EDID copy function
The AC7922 supports EDID (Extended Display Identification) copy function on both input ports to ensure that the resolution is communicated correctly between the source devices and the output monitor.
Additional features
The AC7922 includes four USB 3.2 Gen1 (USB 3.0) 5Gbps ports for sharing peripherals, such as a keyboard, mouse, printer and more. The switch also has a 3.5mm audio jack for connecting headphones or speakers. An HDMI cable, two USB cables, remote control, RS-232 connector and mounting brackets with screws are included.
Prevent accidental power cord disconnection
The power connection on the AC7922 USB-C KVM switch is secured with a screw lock to prevent accidental disconnection.
User scenarios
Business use:
Government offices: Control sensitive systems that are isolated from the network.
Datacenters and server rooms: Troubleshoot, update and maintain servers.
Home use:
Home office: switch easily between your personal computer and work laptop and use only one monitor, mouse, keyboard setup. The switch has a USB-C Power Delivery port for connecting the laptop’s USB-C charger and powering the connected USB-C laptop.
Gaming: switch between a gaming console/desktop and a personal laptop.
Control two devices with a single HDMI monitor, keyboard and mouse
Simplify your workspace by connecting one computer to the AC7922 via HDMI and the other computer/laptop via USB-C. Connect a single HDMI monitor and a keyboard and mouse set to the switch and control both host devices with minimal setup.
Supports up to 4K@60Hz
The AC7922 USB-C/HDMI KVM switch supports 4K@60Hz, 4:4:4 12-bit, HDMI 2.0 and is HDCP 2.3 compliant. The EDID emulator in the KVM switch provides the correct display information from the monitor to the connected device.
Easy switching between computers
Switching between two connected computers is easy with the dedicated button on the AC7922 KVM switch. Prefer to use IR control, a mouse, keyboard shortcuts or RS-232 commands? This is also supported.
100W Power Delivery pass-through
Connect a separate USB-C charger to the charging port of the KVM switch. The connected device receives power via the connected USB-C connection cable.
Automatic input switching
Have two computers connected to the KVM and only one is active? The AC7922 will automatically detect the active device.
EDID copy function
The AC7922 supports EDID (Extended Display Identification) copy function on both input ports to ensure that the resolution is communicated correctly between the source devices and the output monitor.
Additional features
The AC7922 includes four USB 3.2 Gen1 (USB 3.0) 5Gbps ports for sharing peripherals, such as a keyboard, mouse, printer and more. The switch also has a 3.5mm audio jack for connecting headphones or speakers. An HDMI cable, two USB cables, remote control, RS-232 connector and mounting brackets with screws are included.
Prevent accidental power cord disconnection
The power connection on the AC7922 USB-C KVM switch is secured with a screw lock to prevent accidental disconnection.
User scenarios
Business use:
Government offices: Control sensitive systems that are isolated from the network.
Datacenters and server rooms: Troubleshoot, update and maintain servers.
Home use:
Home office: switch easily between your personal computer and work laptop and use only one monitor, mouse, keyboard setup. The switch has a USB-C Power Delivery port for connecting the laptop’s USB-C charger and powering the connected USB-C laptop.
Gaming: switch between a gaming console/desktop and a personal laptop.
Low stock
Description
4K@60Hz | cables included | metal housing |100W USB-C® PD Pass-through | locked power connection | mounting brackets
- 2-Port 4K@60Hz USB Type-C® and HDMI KVM Switch: control two computers with a single monitor, USB keyboard and mouse
- Supports a resolution up to 3840x2160 (4K) @60Hz, 2K@144Hz, USB Type-C® DisplayPort Alternate Mode 1.4, HDMI 2.0 and HDCP 2.3 compliant
- 4 USB-A ports 5Gbps for peripheral sharing; 3.5mm audio out port
- 100W Power Delivery pass-through port for connecting the laptop’s USB-C charger and powering the connected USB-C laptop
- Control the KVM switch with the front panel select button, IR remote control, keyboard hotkeys, mouse or RS-232 commands
- Supplied with an HDMI cable, USB cables, remote control, RS-232 connector and mounting brackets
- EDID emulator per input port provides correct information to the connected PCs
- Power supply included (12V / 1A / 12W); secure locked power connection
- Automatic input switching
The AC7922 2-port USB-C/HDMI KVM switch controls two computers while using a single monitor, single USB keyboard and mouse. The HDMI output supports a monitor with a resolution up to 4K@60Hz. The AC7922 lets you switch between computers using the buttons on the switch itself, the IR remote control, keyboard hotkeys, a mouse, or RS-232 commands. The AC7922 has a solid metal housing and comes with all needed cabling.
Control two devices with a single HDMI monitor, keyboard and mouse
Simplify your workspace by connecting one computer to the AC7922 via HDMI and the other computer/laptop via USB-C. Connect a single HDMI monitor and a keyboard and mouse set to the switch and control both host devices with minimal setup.
Supports up to 4K@60Hz
The AC7922 USB-C/HDMI KVM switch supports 4K@60Hz, 4:4:4 12-bit, HDMI 2.0 and is HDCP 2.3 compliant. The EDID emulator in the KVM switch provides the correct display information from the monitor to the connected device.
Easy switching between computers
Switching between two connected computers is easy with the dedicated button on the AC7922 KVM switch. Prefer to use IR control, a mouse, keyboard shortcuts or RS-232 commands? This is also supported.
100W Power Delivery pass-through
Connect a separate USB-C charger to the charging port of the KVM switch. The connected device receives power via the connected USB-C connection cable.
Automatic input switching
Have two computers connected to the KVM and only one is active? The AC7922 will automatically detect the active device.
EDID copy function
The AC7922 supports EDID (Extended Display Identification) copy function on both input ports to ensure that the resolution is communicated correctly between the source devices and the output monitor.
Additional features
The AC7922 includes four USB 3.2 Gen1 (USB 3.0) 5Gbps ports for sharing peripherals, such as a keyboard, mouse, printer and more. The switch also has a 3.5mm audio jack for connecting headphones or speakers. An HDMI cable, two USB cables, remote control, RS-232 connector and mounting brackets with screws are included.
Prevent accidental power cord disconnection
The power connection on the AC7922 USB-C KVM switch is secured with a screw lock to prevent accidental disconnection.
User scenarios
Business use:
Government offices: Control sensitive systems that are isolated from the network.
Datacenters and server rooms: Troubleshoot, update and maintain servers.
Home use:
Home office: switch easily between your personal computer and work laptop and use only one monitor, mouse, keyboard setup. The switch has a USB-C Power Delivery port for connecting the laptop’s USB-C charger and powering the connected USB-C laptop.
Gaming: switch between a gaming console/desktop and a personal laptop.
Control two devices with a single HDMI monitor, keyboard and mouse
Simplify your workspace by connecting one computer to the AC7922 via HDMI and the other computer/laptop via USB-C. Connect a single HDMI monitor and a keyboard and mouse set to the switch and control both host devices with minimal setup.
Supports up to 4K@60Hz
The AC7922 USB-C/HDMI KVM switch supports 4K@60Hz, 4:4:4 12-bit, HDMI 2.0 and is HDCP 2.3 compliant. The EDID emulator in the KVM switch provides the correct display information from the monitor to the connected device.
Easy switching between computers
Switching between two connected computers is easy with the dedicated button on the AC7922 KVM switch. Prefer to use IR control, a mouse, keyboard shortcuts or RS-232 commands? This is also supported.
100W Power Delivery pass-through
Connect a separate USB-C charger to the charging port of the KVM switch. The connected device receives power via the connected USB-C connection cable.
Automatic input switching
Have two computers connected to the KVM and only one is active? The AC7922 will automatically detect the active device.
EDID copy function
The AC7922 supports EDID (Extended Display Identification) copy function on both input ports to ensure that the resolution is communicated correctly between the source devices and the output monitor.
Additional features
The AC7922 includes four USB 3.2 Gen1 (USB 3.0) 5Gbps ports for sharing peripherals, such as a keyboard, mouse, printer and more. The switch also has a 3.5mm audio jack for connecting headphones or speakers. An HDMI cable, two USB cables, remote control, RS-232 connector and mounting brackets with screws are included.
Prevent accidental power cord disconnection
The power connection on the AC7922 USB-C KVM switch is secured with a screw lock to prevent accidental disconnection.
User scenarios
Business use:
Government offices: Control sensitive systems that are isolated from the network.
Datacenters and server rooms: Troubleshoot, update and maintain servers.
Home use:
Home office: switch easily between your personal computer and work laptop and use only one monitor, mouse, keyboard setup. The switch has a USB-C Power Delivery port for connecting the laptop’s USB-C charger and powering the connected USB-C laptop.
Gaming: switch between a gaming console/desktop and a personal laptop.
Specifications
- Brand
- ACT
- Product category
- Switches / KVM
- Number of screens
- 1
- Connections
- 3.5 mm jack, HDMI, Terminal block, USB, USB C
- Connections (computer)
- HDMI A (full-size) female (x1), USB 3 B female (x1), USB C female (x1)
- Connections (console)
- 3,5 mm jack female (x1), HDMI A (full-size) female (x?), USB 3 A female (x4)
- Detachable computer cable(s)
- Yes
- Number of consoles
- 1
- Number of computers
- 2
- 4K compatible
- Yes
- Max. resolution @ 60Hz
- 3840 x 2160
- Other resolutions
- 2560 x 1440 120/144Hz
- Video signal
- HDMI, USB-C (Alt mode)
- Supported features
- CEC, DP-alternate mode, HDR
- HDMI specification
- HDMI Premium High Speed
- DisplayPort specification
- DisplayPort 1.4
- Other signals
- Analog audio, IR, RS-232, USB 3.2 Gen 1 - SuperSpeed (USB 3.0)
- Control method
- Button, Hot-key, Mouse, Remote control (IR), Serial
- Power supply
- External power supply
- Power supply specification
- 12V / 1A / 12W
- Included
- 2-Port USB Type-C®/HDM 4K@60Hz KVM switch (1x), IR Remote (CR2025 battery included) (1x), 38KHz IR Receiver Cable 1.5mtr (1x), 3pin-3.81mm Phoenix Connector male (1x), USB-A male to USB-B 3.0 male 1.8m (1x), USB Type-C M-M, USB 3.2 GEN2 (1x), HDMI Cable 1.5mtr (1x), Mounting Brackets (2x), Machine Screws M3x4 (4x), Locking power supply 12V/1A (1x), Quick install (1x)
- Switching functionality
- Multiple to one
- Brand item no.
- AC7922
- EAN code
- 8716065589818
ACT 2-Port USB-C®/HDMI 4K@60Hz KVM switch
Item No.AC7922
4K@60Hz | cables included | metal housing |100W USB-C® PD Pass-through | locked power connection | mounting brackets
- 2-Port 4K@60Hz USB Type-C® and HDMI KVM Switch: control two computers with a single monitor, USB keyboard and mouse
- Supports a resolution up to 3840x2160 (4K) @60Hz, 2K@144Hz, USB Type-C® DisplayPort Alternate Mode 1.4, HDMI 2.0 and HDCP 2.3 compliant
- 4 USB-A ports 5Gbps for peripheral sharing; 3.5mm audio out port
- 100W Power Delivery pass-through port for connecting the laptop’s USB-C charger and powering the connected USB-C laptop
- Control the KVM switch with the front panel select button, IR remote control, keyboard hotkeys, mouse or RS-232 commands
- Supplied with an HDMI cable, USB cables, remote control, RS-232 connector and mounting brackets
- EDID emulator per input port provides correct information to the connected PCs
- Power supply included (12V / 1A / 12W); secure locked power connection
- Automatic input switching
The AC7922 2-port USB-C/HDMI KVM switch controls two computers while using a single monitor, single USB keyboard and mouse. The HDMI output supports a monitor with a resolution up to 4K@60Hz. The AC7922 lets you switch between computers using the buttons on the switch itself, the IR remote control, keyboard hotkeys, a mouse, or RS-232 commands. The AC7922 has a solid metal housing and comes with all needed cabling.
Control two devices with a single HDMI monitor, keyboard and mouse
Simplify your workspace by connecting one computer to the AC7922 via HDMI and the other computer/laptop via USB-C. Connect a single HDMI monitor and a keyboard and mouse set to the switch and control both host devices with minimal setup.
Supports up to 4K@60Hz
The AC7922 USB-C/HDMI KVM switch supports 4K@60Hz, 4:4:4 12-bit, HDMI 2.0 and is HDCP 2.3 compliant. The EDID emulator in the KVM switch provides the correct display information from the monitor to the connected device.
Easy switching between computers
Switching between two connected computers is easy with the dedicated button on the AC7922 KVM switch. Prefer to use IR control, a mouse, keyboard shortcuts or RS-232 commands? This is also supported.
100W Power Delivery pass-through
Connect a separate USB-C charger to the charging port of the KVM switch. The connected device receives power via the connected USB-C connection cable.
Automatic input switching
Have two computers connected to the KVM and only one is active? The AC7922 will automatically detect the active device.
EDID copy function
The AC7922 supports EDID (Extended Display Identification) copy function on both input ports to ensure that the resolution is communicated correctly between the source devices and the output monitor.
Additional features
The AC7922 includes four USB 3.2 Gen1 (USB 3.0) 5Gbps ports for sharing peripherals, such as a keyboard, mouse, printer and more. The switch also has a 3.5mm audio jack for connecting headphones or speakers. An HDMI cable, two USB cables, remote control, RS-232 connector and mounting brackets with screws are included.
Prevent accidental power cord disconnection
The power connection on the AC7922 USB-C KVM switch is secured with a screw lock to prevent accidental disconnection.
User scenarios
Business use:
Government offices: Control sensitive systems that are isolated from the network.
Datacenters and server rooms: Troubleshoot, update and maintain servers.
Home use:
Home office: switch easily between your personal computer and work laptop and use only one monitor, mouse, keyboard setup. The switch has a USB-C Power Delivery port for connecting the laptop’s USB-C charger and powering the connected USB-C laptop.
Gaming: switch between a gaming console/desktop and a personal laptop.
Control two devices with a single HDMI monitor, keyboard and mouse
Simplify your workspace by connecting one computer to the AC7922 via HDMI and the other computer/laptop via USB-C. Connect a single HDMI monitor and a keyboard and mouse set to the switch and control both host devices with minimal setup.
Supports up to 4K@60Hz
The AC7922 USB-C/HDMI KVM switch supports 4K@60Hz, 4:4:4 12-bit, HDMI 2.0 and is HDCP 2.3 compliant. The EDID emulator in the KVM switch provides the correct display information from the monitor to the connected device.
Easy switching between computers
Switching between two connected computers is easy with the dedicated button on the AC7922 KVM switch. Prefer to use IR control, a mouse, keyboard shortcuts or RS-232 commands? This is also supported.
100W Power Delivery pass-through
Connect a separate USB-C charger to the charging port of the KVM switch. The connected device receives power via the connected USB-C connection cable.
Automatic input switching
Have two computers connected to the KVM and only one is active? The AC7922 will automatically detect the active device.
EDID copy function
The AC7922 supports EDID (Extended Display Identification) copy function on both input ports to ensure that the resolution is communicated correctly between the source devices and the output monitor.
Additional features
The AC7922 includes four USB 3.2 Gen1 (USB 3.0) 5Gbps ports for sharing peripherals, such as a keyboard, mouse, printer and more. The switch also has a 3.5mm audio jack for connecting headphones or speakers. An HDMI cable, two USB cables, remote control, RS-232 connector and mounting brackets with screws are included.
Prevent accidental power cord disconnection
The power connection on the AC7922 USB-C KVM switch is secured with a screw lock to prevent accidental disconnection.
User scenarios
Business use:
Government offices: Control sensitive systems that are isolated from the network.
Datacenters and server rooms: Troubleshoot, update and maintain servers.
Home use:
Home office: switch easily between your personal computer and work laptop and use only one monitor, mouse, keyboard setup. The switch has a USB-C Power Delivery port for connecting the laptop’s USB-C charger and powering the connected USB-C laptop.
Gaming: switch between a gaming console/desktop and a personal laptop.
Low stock
Description
4K@60Hz | cables included | metal housing |100W USB-C® PD Pass-through | locked power connection | mounting brackets
- 2-Port 4K@60Hz USB Type-C® and HDMI KVM Switch: control two computers with a single monitor, USB keyboard and mouse
- Supports a resolution up to 3840x2160 (4K) @60Hz, 2K@144Hz, USB Type-C® DisplayPort Alternate Mode 1.4, HDMI 2.0 and HDCP 2.3 compliant
- 4 USB-A ports 5Gbps for peripheral sharing; 3.5mm audio out port
- 100W Power Delivery pass-through port for connecting the laptop’s USB-C charger and powering the connected USB-C laptop
- Control the KVM switch with the front panel select button, IR remote control, keyboard hotkeys, mouse or RS-232 commands
- Supplied with an HDMI cable, USB cables, remote control, RS-232 connector and mounting brackets
- EDID emulator per input port provides correct information to the connected PCs
- Power supply included (12V / 1A / 12W); secure locked power connection
- Automatic input switching
The AC7922 2-port USB-C/HDMI KVM switch controls two computers while using a single monitor, single USB keyboard and mouse. The HDMI output supports a monitor with a resolution up to 4K@60Hz. The AC7922 lets you switch between computers using the buttons on the switch itself, the IR remote control, keyboard hotkeys, a mouse, or RS-232 commands. The AC7922 has a solid metal housing and comes with all needed cabling.
Control two devices with a single HDMI monitor, keyboard and mouse
Simplify your workspace by connecting one computer to the AC7922 via HDMI and the other computer/laptop via USB-C. Connect a single HDMI monitor and a keyboard and mouse set to the switch and control both host devices with minimal setup.
Supports up to 4K@60Hz
The AC7922 USB-C/HDMI KVM switch supports 4K@60Hz, 4:4:4 12-bit, HDMI 2.0 and is HDCP 2.3 compliant. The EDID emulator in the KVM switch provides the correct display information from the monitor to the connected device.
Easy switching between computers
Switching between two connected computers is easy with the dedicated button on the AC7922 KVM switch. Prefer to use IR control, a mouse, keyboard shortcuts or RS-232 commands? This is also supported.
100W Power Delivery pass-through
Connect a separate USB-C charger to the charging port of the KVM switch. The connected device receives power via the connected USB-C connection cable.
Automatic input switching
Have two computers connected to the KVM and only one is active? The AC7922 will automatically detect the active device.
EDID copy function
The AC7922 supports EDID (Extended Display Identification) copy function on both input ports to ensure that the resolution is communicated correctly between the source devices and the output monitor.
Additional features
The AC7922 includes four USB 3.2 Gen1 (USB 3.0) 5Gbps ports for sharing peripherals, such as a keyboard, mouse, printer and more. The switch also has a 3.5mm audio jack for connecting headphones or speakers. An HDMI cable, two USB cables, remote control, RS-232 connector and mounting brackets with screws are included.
Prevent accidental power cord disconnection
The power connection on the AC7922 USB-C KVM switch is secured with a screw lock to prevent accidental disconnection.
User scenarios
Business use:
Government offices: Control sensitive systems that are isolated from the network.
Datacenters and server rooms: Troubleshoot, update and maintain servers.
Home use:
Home office: switch easily between your personal computer and work laptop and use only one monitor, mouse, keyboard setup. The switch has a USB-C Power Delivery port for connecting the laptop’s USB-C charger and powering the connected USB-C laptop.
Gaming: switch between a gaming console/desktop and a personal laptop.
Control two devices with a single HDMI monitor, keyboard and mouse
Simplify your workspace by connecting one computer to the AC7922 via HDMI and the other computer/laptop via USB-C. Connect a single HDMI monitor and a keyboard and mouse set to the switch and control both host devices with minimal setup.
Supports up to 4K@60Hz
The AC7922 USB-C/HDMI KVM switch supports 4K@60Hz, 4:4:4 12-bit, HDMI 2.0 and is HDCP 2.3 compliant. The EDID emulator in the KVM switch provides the correct display information from the monitor to the connected device.
Easy switching between computers
Switching between two connected computers is easy with the dedicated button on the AC7922 KVM switch. Prefer to use IR control, a mouse, keyboard shortcuts or RS-232 commands? This is also supported.
100W Power Delivery pass-through
Connect a separate USB-C charger to the charging port of the KVM switch. The connected device receives power via the connected USB-C connection cable.
Automatic input switching
Have two computers connected to the KVM and only one is active? The AC7922 will automatically detect the active device.
EDID copy function
The AC7922 supports EDID (Extended Display Identification) copy function on both input ports to ensure that the resolution is communicated correctly between the source devices and the output monitor.
Additional features
The AC7922 includes four USB 3.2 Gen1 (USB 3.0) 5Gbps ports for sharing peripherals, such as a keyboard, mouse, printer and more. The switch also has a 3.5mm audio jack for connecting headphones or speakers. An HDMI cable, two USB cables, remote control, RS-232 connector and mounting brackets with screws are included.
Prevent accidental power cord disconnection
The power connection on the AC7922 USB-C KVM switch is secured with a screw lock to prevent accidental disconnection.
User scenarios
Business use:
Government offices: Control sensitive systems that are isolated from the network.
Datacenters and server rooms: Troubleshoot, update and maintain servers.
Home use:
Home office: switch easily between your personal computer and work laptop and use only one monitor, mouse, keyboard setup. The switch has a USB-C Power Delivery port for connecting the laptop’s USB-C charger and powering the connected USB-C laptop.
Gaming: switch between a gaming console/desktop and a personal laptop.
Specifications
- Brand
- ACT
- Product category
- Switches / KVM
- Number of screens
- 1
- Connections
- 3.5 mm jack, HDMI, Terminal block, USB, USB C
- Connections (computer)
- HDMI A (full-size) female (x1), USB 3 B female (x1), USB C female (x1)
- Connections (console)
- 3,5 mm jack female (x1), HDMI A (full-size) female (x?), USB 3 A female (x4)
- Detachable computer cable(s)
- Yes
- Number of consoles
- 1
- Number of computers
- 2
- 4K compatible
- Yes
- Max. resolution @ 60Hz
- 3840 x 2160
- Other resolutions
- 2560 x 1440 120/144Hz
- Video signal
- HDMI, USB-C (Alt mode)
- Supported features
- CEC, DP-alternate mode, HDR
- HDMI specification
- HDMI Premium High Speed
- DisplayPort specification
- DisplayPort 1.4
- Other signals
- Analog audio, IR, RS-232, USB 3.2 Gen 1 - SuperSpeed (USB 3.0)
- Control method
- Button, Hot-key, Mouse, Remote control (IR), Serial
- Power supply
- External power supply
- Power supply specification
- 12V / 1A / 12W
- Included
- 2-Port USB Type-C®/HDM 4K@60Hz KVM switch (1x), IR Remote (CR2025 battery included) (1x), 38KHz IR Receiver Cable 1.5mtr (1x), 3pin-3.81mm Phoenix Connector male (1x), USB-A male to USB-B 3.0 male 1.8m (1x), USB Type-C M-M, USB 3.2 GEN2 (1x), HDMI Cable 1.5mtr (1x), Mounting Brackets (2x), Machine Screws M3x4 (4x), Locking power supply 12V/1A (1x), Quick install (1x)
- Switching functionality
- Multiple to one
- Brand item no.
- AC7922
- EAN code
- 8716065589818